XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Unhook the end of the bumper cover at the front edge from the catches on both sides.
-
Carefully pull off the ends of the bumper cover until the catches at the rear edge, at the rear fender and under the tail lamp, release.
-
Pull the bumper cover backwards.
B
-
Disconnect the connectors under the right-hand tail lamp. The catch is underneath.
Note! Applies to cars with parking assistance.
Applies to cars with single end pipe
-
Disconnect the front rubber mounting from the car body.
Applies to cars with twin end pipe
-
Disconnect the front rubber mounting from the car body.