XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Route the cable with the ground cable from the rubber grommet in front of the struts on the bracket for the electric Park Brake Module, up to the
TRM unit.
-
Plug the connector into the TRM unit.
Note! If the car is fitted with a MMM unit, the cables are routed and clipped in the same way by the bracket struts for this.
-
Attach both cables to the rear struts on the electric Park Brake Module bracket and by the cable conduit. Use cable ties with and without clips.
-
Connect the ground cable's black male connector (1) to the corresponding female connector (2) on the cable running from the forward outlet on the
cable conduit.