XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Insert a small flat head screwdriver in the hole in the clip. Press so that the catches on the inside are pressed together and the upper edge of the
panel can be prized off.
-
Carefully pry off the panel at the front and rear edge. It is secured by a clip at each end.
-
Remove the panel with the rubber strip.
-
Unhook the rubber strip from the panel.
-
Remove all clips (8 pcs on each side) from the sill, and at the front and rear wing, and replace with new ones.
-
Remove the front end of the panel. The end must be reused.
The panel will not be reused.