XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
![background image](/volvo/xc60_fwd/l6-3.2l_vin_96_b6324s2/Page-1463001.png)
Brake Master Cylinder: Service and Repair
L.H.D.
Master cylinder, brake
Operation number: 52130-2
Removal
Note! Removal steps in this procedure may contain installation details.
See information about safety information brake system Refer to: Safety information brake system See: Service Precautions
Remove the following items:
-
battery Refer to: Battery See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
-
Reservoir, brake fluid Refer to: Reservoir, brake fluid, B6304T2, L.H.D, B6324S, L.H.D See: Brake Fluid Reservoir/Service and Repair
-
Plenum chamber Refer to: Plenum chamber See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair
Torque: M6, 10 Nm
Caution! Make sure that all openings are sealed. Use new blanking caps.
Note! Make sure that the seal is correctly located.
1. Torque: Ø8 mm diameter brake line, 18 Nm
2. Torque: Ø8 mm diameter brake line, 18 Nm
3. Torque: M8, 24 Nm
Installation
To install, reverse the removal procedure.
Perform bleeding air brake system Refer to: Brake system bleeding See: Brake Bleeding/Service and Repair