XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Fluid - A/T: Procedures
Transmission oil level - checking
Operation number: 43941-2
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Preparatory work
Removing the lower engine cover
Slacken off the screws and remove the lower engine cover.
Removing air filter housing
Remove the air cleaner (ACL) housing. Refer to: Air cleaner housing, B6324S, TF-80SC AWD, B6324S, TF-80SC See: Filters/Air Cleaner Housing
Before filling
Warning! Avoid skin contact with the specified material.
Warning! Be prepared to collect escaping fluids.
Caution! Ensure that equipment and tools are clean and free from contaminants and lubricant.
Remove filler plug (Torx 55).
Suspend a filler syringe or a hose with funnel in the filler hole. Use transmission fluid: Refer to: Lubrication transmission See: Specifications/Fluid Type
Specifications/Transmission and Drivetrain/System Specifications
Installing the air cleaner (ACL)
Temporarily install the air cleaner (ACL) housing. Refer to: Air cleaner housing, B6324S, TF-80SC AWD, B6324S, TF-80SC See: Filters/Air Cleaner
Housing
Check
