XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
![background image](/volvo/xc60_fwd/l6-3.2l_vin_96_b6324s2/Page-1551008.png)
-
Measure and mark the centre of the embossing using a scriber.
-
Pre-drill using a - 3 mm (1/8") bit.
-
Drill out the hole. Use a -27 mm (1 1/16") diameter hole saw.
-
File out the hole with a round and square file as illustrated.
-
Remove any swarf.
-
Take the electrical socket from the kit. Install and tighten the electrical socket using the nut on the rear.