XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Press in the locking tab on the cable terminal and carefully pull out the cable and the cable terminal. Use tool: 951 2812 Terminal removal tool See:
Tools and Equipment/951 2812 Terminal Removal Tool or tool 951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal
Removal Tool , see the graphic.
Assembly
Assembling primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Assembling secondary lock
Press the secondary lock into place.
Transmission Control Unit Wiring Harness
Transmission Control Unit Wiring Harness
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removal
Removing cover control system
Remove the cover over the control system. Refer to: Cover, control system, B6304T2, TF-80SC AWD, B6324S, TF-80SC AWD, B6324S, TF-80SC
See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Pan/Service and Repair.