volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Changes Introduced Up to April 2009 Inclusive|Page 5986 > < Changes Introduced Up to April 2009 Inclusive|Page 5984
Page 1
background image

Control Module: Service and Repair

Transmission Control Module (TCM)

Operation number: 43715-2

Removal

Note! Removal steps in this procedure may contain installation details.

Note! Make sure that the selector lever is in the neutral (N) position.

Perform battery disconnecting and connecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Disconnecting and Connecting

Remove Accessory Drive Component Bracket Refer to: Accessory Drive Component Bracket See: Engine, Cooling and Exhaust/Engine/Drive Belts,
Mounts, Brackets and Accessories/Engine Accessory Bracket/Service and Repair 

Caution! Make sure that the terminals or pins/sockets of the transmission control module (TCM) and the TCM electrical connector are not
bent or damaged.

Torque: Gear selector mechanism (nut), 16 Nm

Installation

Changes Introduced Up to April 2009 Inclusive|Page 5986 > < Changes Introduced Up to April 2009 Inclusive|Page 5984