volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Cross-Member Bushing > < Procedure 1|Page 13654
Page 18
background image

Install
-

the mudguard on the lateral link, 1 x M8

-

the mudguard under the control arm. 2 screws.

Calibrating the position sensor
If the vehicle is equipped with Four-C (Continuously Controlled Chassis Concept), calibrate the position sensors.

Note:  It uses the same position sensor for the Bi-Xenon lamps.

Rear Cross-Member Bushing > < Procedure 1|Page 13654