Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing > Page 2955

Page 3
background image

-

a new cover at the rear edge of the camshaft.

Install the auxiliaries belt around the pulley on the crankshaft.

 Install:

-

the plastic nuts for the cover in the right-hand wing liner

-

the right front wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Install:

-

front timing cover. Tension the auxiliaries belt. Check that it is correctly positioned on all pulleys

-

the expansion tank

-

the hose between the expansion tank and the radiator. Remove the lock grip pliers

-

the servo reservoir

-

the upper timing cover.

Install:

-

the engine stabilizer brace. Tighten the screws

-

the screw holding the engine stabilizer brace to the bracket on the engine. Tighten

-

the battery negative lead. Also read  Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.

Final check

Check and top up if required:

-

coolant level

-

the servo fluid level.

Test drive the engine.

Removing/Installing the rear camshaft seal

Preparation

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing > Page 2955

[PREV PAGE] [NEXT PAGE]