XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Remove
-
the connector from the mass air flow (MAF) sensor
-
the intake hose from the mass air flow (MAF) sensor. Seal the opening.
Release the hoses from the bracket at the rear of the cylinder head. Remove the bracket.
Remove
-
the clamp for the positive lead at the rear of the cylinder head
-
the torque bracket
-
the pipe screw for the water-heated crankcase ventilation.
Removing the fuel rail
-
Remove the clamp for the injector wiring at the rear of the cylinder head
-
Detach the wiring from the injectors
-
Remove the fuel rail mounting screws
-
Spray universal oil or similar around the injector connectors on the intake manifold
-
Gently work the fuel rail and injectors loose
-
Separate the quick-release connector for the fuel line. See Fuel line, lock See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Rail/Service and Repair.
-
Carefully put the fuel rail to one side.