Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Intake Manifold Gasket > Component Information > Service and Repair > Intake Manifold/Gasket, Replacing > Page 3011

Page 3
background image

Install:

-

new gasket held in position by the lower screws for the intake manifold. Do not forget the clamp for the fuel line at the screw in the lower
row.

-

the nipple for the water heated crankcase ventilation

-

the intake manifold. Do not forget the crankcase ventilation hose. The hose must be inserted up through the gap between the second and third ducts

-

the 3 upper screws. Torque tighten all the screws starting from the center.

Finishing

Install

-

the fuel rail. Press together the quick-release connector. Use new screws, see also: Fuel line, lock See: Powertrain Management/Fuel Delivery and
Air Induction/Fuel Rail/Service and Repair 

-

injector connectors

-

the protective cover over the fuel rail

-

the vacuum hoses according to the earlier markings

-

the plastic charge air pipe between the throttle body (TB) and the charge air cooler (CAC)

-

the connectors to the throttle body (TB)

-

the dip stick in the intake manifold.

Final check

Test drive the car. Check the following:

-

that there is no fuel leakage

-

that the engine operates normally.

Check that everything is in position. Clean the engine compartment.

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Intake Manifold Gasket > Component Information > Service and Repair > Intake Manifold/Gasket, Replacing > Page 3011

[PREV PAGE] [NEXT PAGE]