Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Adjustments > Checking Valve Clearance > Page 3200
Note! Measurements should only be taken on a cold engine. A suitable temperature is approximately 20 °C.
Use feeler gauge 999 5752 Feeler gauge See: Tools and Equipment/999 5752 Feeler Gauge.
Inlet valve: 0.20 ± 0.03 mm.
Note! The tolerances are less when setting! When checking the valve clearance through the plug hole, the tolerances are larger.
- 0.01 mm at 15 °C
Correcting measured clearance
Lift out the upper section of the press tool.
When the correct valve clearance is reached
the press tool 999 5765
Note! Carefully mark the tappets so that exact reinstallation can be carried out.
Repeat the procedure for measuring the valve clearance for all cylinders on both the intake and exhaust sides. See Checking the valve clearance.
Installing tappets and camshafts
|[PREV PAGE] [NEXT PAGE]|