Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Diagrams > Diagram Information and Instructions > Page 4297
Disconnect the cable terminal that is to be replaced. See: Connectors, repair See: Diagrams/Diagnostic Aids/Connectors, Repair.
Hint: If several cable terminals are to be replaced at the same time, spread out the splice points, as illustrated.
Cut the cable at a suitable point. Note the length of the new cable terminal cable.
Select a cable terminal with the same area as the old one.
Reinstall the cable harness. If necessary use a crimping sleeve and tie straps.
|[PREV PAGE] [NEXT PAGE]|