Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Accessory Electronic Module (AEM) > Page 4444

Page 6
background image

-

Fit fuse 15A from the kit in position 3 on the fuse holder.

-

Install the new bracket on the right-hand rear side member as illustrated

-

Install and tighten the bracket parallel with the side member. Use the screw and the nut from the kit

-

Drill a -4 mm (5/32") hole in the side member, through the front hole in the bracket.

-

Remove any swarf.

-

Detach the bracket and treat the edges of the holes using a rust-proofing agent.

-

Tighten the bracket to the side member.

-

Tighten the rear bolt/nut to 10 Nm (8 lbf.ft.).

Applies to cars equipped with a Diversity aerial amplifier 

-

Wrap foam tape around the cable / wiring for the aerial amplifier.

Applies to all models

-

Take the accessory electronic module from the kit. Connect the routed cable to the cable illustrated.

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Accessory Electronic Module (AEM) > Page 4444

[PREV PAGE] [NEXT PAGE]