Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Accessory Electronic Module (AEM) > Page 4452

Page 14
background image

-

Reinstall the floor support. Tighten the floor support together with the bracket for the accessory electronic module. Use the three M6-screws,
tightening them to 10 Nm (8 lbf.ft.).

-

Position two new spacer washers between the front hole in the bracket and the floor support. Tighten using a new self tapping screw.

Applies to cars equipped with a Diversity aerial amplifier 

-

Wrap foam tape around the cable / wiring for the aerial amplifier.

Applies to all models

-

Take the accessory electronic module from the kit. Connect the routed cable to the cable illustrated.

-

Press the control module onto the bracket by the side member

-

Turn the ignition key to position II.

-

Reconnect the battery negative lead

-

Reinstall the panels.

-

Refit the insulation panel.

-

Reinstall the storage box.

-

Reinstall both floor hatches

-

Program the software according to the service information in VIDA.

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Accessory Electronic Module (AEM) > Page 4452

[PREV PAGE] [NEXT PAGE]