XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Release the inner housing section on the socket housing by lifting the sleeve beside the catch and pulling the housing section outwards.
Disconnect the cable terminals. Use tool 951 2812 Terminal removal tool See: Tools and Equipment/951 2812 Terminal Removal Tool or951 2637
Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool , as illustrated.
At the same time pull the cable carefully backwards.
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Slide the receptacle housing into the connector.
Press the secondary lock into place.
Sealed Connector Type 1
Connector sealed, repair
951 2631 Terminal removal tool See: Tools and Equipment/951 2631 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
The connector has no secondary lock.