Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 4620

Page 61
background image

Note! The relay holders can be connected and several locks may need to be adjusted at the same time.

At the same time pull the cable carefully backwards.

Alternatively use tool 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool as illustrated.

Installation

Primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Secondary lock

Slide back the secondary lock.

Finishing work

Install the relays.

Note! Take care with the positioning.

Reinstall the central relay box.

Connector Relay Box, Repair

Connector relay box, repair

Special tools:
951 2633 Terminal removal tool  See: Tools and Equipment/951 2633 Terminal Removal Tool

951 2639 Terminal removal tool  See: Tools and Equipment/951 2639 Terminal Removal Tool

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 4620

[PREV PAGE] [NEXT PAGE]