Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Fuel Level Sensor > Component Information > Service and Repair > Page 4720

Page 5
background image

-

Install the wire on the new ejector for the level sensor and pump

-

Insert the hoses and wiring into the tank via the right-hand tank hole

-

Grip the right-hand level sensor and pump holder and pinch it so that the float is held in its lowest position

-

Carefully and slowly lower the holder. Carefully work the holder into place

-

Pull the wire so that the hoses and wiring end up on the left side of the tank

-

Install the left-hand level sensor on the ejector

-

Install the switches on the underneath of the left-hand level sensor

-

Remove the wire from the ejector.

Finishing 

-

Install the sensor, backrest, side cushion and seat cushion. See Draining the fuel tank.

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Fuel Level Sensor > Component Information > Service and Repair > Page 4720

[PREV PAGE] [NEXT PAGE]