Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Powertrain Management > Computers and Control Systems > Variable Valve Timing Solenoid > Component Information > Service and Repair > Procedures > Page 4861
Remove the lock
Caution! Make sure that the connector pins end up in the correct position.
Install the connector pins in the seat so that the locks on the pin end up in the opening on the side of the seat.
Install the catch.
Splice the cables. Refer to: Joining the cables See: Diagrams/Diagnostic Aids/Wiring/Joining the Cables
|[PREV PAGE] [NEXT PAGE]|