XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Disconnect the thick plastic pipe. Press the pipe towards the carbon filter container. Press in the two catches.
Disconnect the thin plastic pipe. Press in the catches. These are positioned forward towards the fuel tank. Pull off the pipe. Disconnect the plastic pipe
from the clip.
Remove the rubber hose from the carbon filter container and the tie strap.
Remove the clamp holding the rubber hose (on-board vapor recovery (ORVR) fuel tanks only).
Remove the shut-off valve from the bracket. Pull the shut-off valve straight up (ORVR fuel tanks only).
Remove the two screws that secure the bracket.
Pull the bracket and the carbon filter container down. Disconnect the carbon filter container from the bracket.
Installing the carbon filter container
Install the carbon filter container on the bracket. Tighten the screw. Tighten to 10 Nm.
Place the bracket and carbon filter container against the sub-frame.
(ORVR fuel tanks only) Press the shut-off valve into place on the bracket. Install a new hose clamp on the rubber hose.
Install the rubber hose on the carbon filter container and the tie strap.
Install the two screws that secure the bracket. Tighten to 25 Nm.
Install the thin plastic pipe in the clip on the carbon filter container. A "click" should be heard.
Installing the heat deflector plate
