Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Pump > Fuel Pump Control Unit > Component Information > Description and Operation > Page 5004
Check carefully that the seal is in place when the hatch is installed.
Open the vehicle's cable channel and lay down the cable harness.
The control module shall be placed in the spare wheel well's rear part on the right side, between the two markings and below the bead of sealing
To install, reverse the removal procedure.
Vehicles with fuel pump module originally located in spare wheel well's right trailing edge.
new control module
the connector to the control module
the luggage compartment mat/floor hatches
|[PREV PAGE] [NEXT PAGE]|