Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Service and Repair > Left Fuel Gauge Sensor > Page 5081

Page 6
background image

Install the left-hand level sensor on the ejector.
Install the connectors on the underside of the left-hand level sensor.
Install a new O-ring. Lubricate the new O-ring. Use petroleum jelly.
Press the left level sensor down so that the row of protruding cables runs along the vehicle.
Check that the O-ring is not trapped.
Install the screw. Use 999 5720 Wrench  See: Tools and Equipment/999 5720 Wrench. Tighten. See: Tightening torque See: Specifications/Mechanical
Specifications/Starting and Charging.
Position the wiring in the cut-out in the rubber ring.
Wipe up any fuel spillage.

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Service and Repair > Left Fuel Gauge Sensor > Page 5081

[PREV PAGE] [NEXT PAGE]