Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Service and Repair > Left Fuel Gauge Sensor > Page 5111

Page 36
background image

Tape the fuel pump's fuel lines/electrical wiring to the plastic pipe.
Pull the wiring out of the hole for the level sensor. Remove the plastic pipe and the tape. Check that there is no tape/adhesive residue on the wiring.
Pull the wiring forwards and backwards to check that it has not bent or got trapped.

Finishing

-

Install the sensor, backrest, side cushion and seat cushion. See Draining the fuel tank See: Service and Repair.

Right Side Fuel Pump With Level Sensor

Right side fuel pump with level sensor

Removal

Preparation

-

Remove left side fuel gauge sensor as described in Left fuel gauge sensor See: Left Fuel Gauge Sensor 

-

Attach a piece of string or steel wire onto attachments for wire and tube system on left side fuel gauge sensor.

Powertrain Management > Fuel Delivery and Air Induction > Fuel Tank > Fuel Gauge Sender > Component Information > Service and Repair > Left Fuel Gauge Sensor > Page 5111

[PREV PAGE] [NEXT PAGE]