Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Powertrain Management > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Adjustments > Checking Valve Clearance > Page 3868

Page 6
background image

Lift up and position the brake fluid reservoir and the expansion tank on top of the engine.

Use drift 999 5718 on camshafts with variable valve timing units. Use drift 999 5719 on camshafts without variable valve timing.

Use new seals and lubricate the surface of the seal that the camshaft rotates against. Use the variable valve timing unit/timing belt pulley mounting
screws. Tighten the screws until the drift bottoms out.

Remove the drift.

Fixing The Crankshaft Position 

Remove 

-

the mounting screws for the starter motor. Pull off the starter motor. Place the starter motor to one side

Powertrain Management > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Adjustments > Checking Valve Clearance > Page 3868

[PREV PAGE] [NEXT PAGE]