Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Service and Repair > Brake Control Module (BCM), Replacing > Page 193

Page 1
background image

Electronic Brake Control Module: Service and Repair
Replacing the Control Module for ABS and Dynamic Stability and Traction Control (DSTC)

Replacing the control module for ABS and dynamic stability and traction control (DSTC)

Preparation

Disconnect the battery lead

See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

Preparations for replacement

Remove the air cleaner (ACL) housing

See Brake pipe master cylinder / ABS unit, replacing, B5254T2 See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.

Remove the integrated relay / fusebox. Remove the connector for the ABS unit 

See Replacing the brake pipe between the hydraulic unit, front wheel and junction , B5254T2 See: Brakes and Traction Control/Hydraulic System/Brake
Hose/Line/Service and Repair/Replacing the Brake Pipe Between the Hydraulic Unit, Front Wheel and Junction.

Removal

Remove the control module

Remove:

-

the pump motor connector

-

the four screws. Use a 6 mm torx external socket.

Carefully lift the control module.

Check the control module

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Service and Repair > Brake Control Module (BCM), Replacing > Page 193

[PREV PAGE] [NEXT PAGE]