Volvo Workshop Manuals
XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Service and Repair > Comfort Panel (Including Climate Control Module, CCM), Replacing > Page 236
Release the catches. Pull off the panel
The panel has double-sided adhesive tape. Ensure that any remains of the tape are removed from the black panel.
Remove the backing from the tape on the panel and press the panel into place.
Order applicable software.
After replacing the control module, the following must be carried out.
Reprogram the customer programmed data
Carry out self-adjustment of the damper motor end positions
Test drive the car. Check that the function of the climate control system is OK
Then check that no diagnostic trouble codes have been stored during the replacement.
Information about programming the control module, damper motor self-adjustment and reading off diagnostic trouble codes can be found under VIDA
Dashboard environment panel switches
|[PREV PAGE] [NEXT PAGE]|