Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Mounted Controls Communication Module > Component Information > Testing and Inspection > Reading and Clearing Diagnostic Trouble Codes > Page 1005

Page 91
background image

Finishing the read off

The read off is now complete.
Exit this procedure. Log off VIDA. The completed log can now be printed or saved.
Save the log to a disc or save it locally. To save it locally, name the filevehcom.logunderC:\volvo\logs.

Continue - DONE

-------------------------------------------------

Communication fault

Communication has been interrupted for one of the following reasons:

-

The ignition is switched off

-

VCT2000 disconnected from the data link connector (DLC)

-

VCT2000 disconnected from the VIDA cart

-

Communication problems in VIDA application or in car.

-

No voltage in the data link connector (DLC).

Check therefore:

-

That the control module power supply and ground terminal are fault-free.

-

That the fuse for the data link connector (DLC) is intact.

-

that the ignition is on

-

that the battery voltage (system voltage) is normal (approximately 12 V).

If necessary a battery charger can be connected during the test.
For information about charge currents and the battery, see: Battery, charging See: Starting and Charging/Battery/Service Precautions/Technician Safety
Information/Battery, Charging 

-

that VCT2000 is correctly connected to the VIDA cart and the data link connector (DLC)

-

that VCT2000 and the wiring is fault-free.

Other information

-

For information about fuse and terminal numbers, see the relevant Wiring Diagram.

Try to establish communication again or exit reading off diagnostic trouble codes (DTCs). Depending on the communication fault, select one of the
following options.

1. Try again
2. Fault-trace more comprehensively for the communication problem that has occurred
3. Exit fault-tracing / Read off from the next system.

Which alternative is requested?

1 -  Reading off diagnostic data

2 -  Checking communication

3 - FAILED

-------------------------------------------------

Checking communication

Checking communication errors

Selecting car model

Select car model to obtain relevant troubleshooting information.

Select one of the following model alternatives

1. S40 (04-) / V50.

Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Mounted Controls Communication Module > Component Information > Testing and Inspection > Reading and Clearing Diagnostic Trouble Codes > Page 1005

[PREV PAGE] [NEXT PAGE]