volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Note! The cruise control/turn signal switch should be in the neutral position during installation. The pin that controls automatic cancel may
otherwise be broken off.

Connect 8-pin connector (2).

Install:

-

the new cruise control/turn signal indicator switch

Connect the 6-pin connector (3) from the lever to the connector (4), on the left-hand side of the steering column.

Install:

-

steering wheel covers and panel.

Function test the switch.

Sensors and Switches > Sensors and Switches - Lighting and Horns > Turn Signal Switch > Component Information > Service and Repair > Turn Signal Switch, Replacing > Page 1595

< PREV PAGE NEXT PAGE >