Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Fuel Pressure Sensor > Component Information > Description and Operation > Page 1642

Page 1
background image

Fuel Pressure Sensor: Service and Repair

Fuel pressure sensor

Operation number: 28406-3

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Work on the fuel system.  Refer to: Safety regulations for handling fuel See: Powertrain Management/Fuel Delivery and Air Induction/Service
Precautions/Safety Regulations for Handling Fuel 

Depressurize the fuel system.  Refer to: Fuel system pressure release See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Fuel Pressure
Release/Service and Repair 

Warning! Wear protective goggles.

Blow clean with compressed air around the fuel pressure sensor.

Remove the following items:

-

cable tie

-

Connector

-

screw.

Place paper under the fuel pressure sensor to take care of any petrol that may remain in the fuel distribution pipe.
Cut out the bottom of a plastic bottle and place on the paper.
Remove the fuel pressure sensor.

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Fuel Pressure Sensor > Component Information > Description and Operation > Page 1642

[PREV PAGE] [NEXT PAGE]