Do Not Sell My Personal Information
volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Remove the cable clamps around the wiring and the rubber seal.
Remove the sockets from the connector casing.
Insert a screwdriver between the casing and socket. Press in the catch. At the same time, slide the sockets out of the casing.

Remove the socket for the cables

Remove the socket for the cables to the oil temperature sensor. 2- pin, pins 12 and 13.

Remove the wiring pins from the socket

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Temperature Sensor/Switch, A/T > Component Information > Service and Repair > Temperature Sensor, Transmission Fluid, Replacing > Page 1809

< PREV PAGE NEXT PAGE >