XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
Remove the Torx TX40 screws for the control system cover.
-
Clean the sealing compound from the threads. Use tap M8 x 1.25.
-
Remove the cover. Use gasket wedge 999 5477. Carefully tap it in between the cover and transmission so as not to bend the seal flange on the
cover.
-
Clean the gasket residue from the cover and the transmission.
NOTE: Ensure that no debris enters the transmission. Wash the cover thoroughly.
Removing the cable harness
Remove:
-
the connectors for the solenoid valves
-
the screw for the oil temperature sensor holder. Remove the sensor from the control system- the cable harness from the holders on the control
system.
-
Remove the cable harness.
Installation
Connecting the cable harness