volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 10495 > < Procedures|Page 10493
Page 20
background image

Angle up the insulation panel.
Remove the screw holding the cover and shock absorber.
Raise the car.

Remove:

-

the wheel

-

the spring strut from the lower control arm.

Note! The spring struts are slightly compressed.

Lowering the rear suspension

Remove the parking brake cable mounting in the sub-frame on both sides.

Remove:

-

the exhaust system from the three-way catalytic converter (TWC) and rearward. See Exhaust system, replacing See: Engine, Cooling and
Exhaust/Exhaust System/Service and Repair 

-

the wheels.

Remove the propeller shaft from the viscous coupling/Active on Demand Coupling. See Final drive, replacing, M58, M66 AWD, AW50/51 AWD See:
Transmission and Drivetrain/Differential Assembly/Service and Repair/Final Drive, Replacing.

Procedures|Page 10495 > < Procedures|Page 10493