volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Rinse with cleaner.
Blow again.
Regrease the solenoid using engine oil to avoid sticking.
After cleaning, check the function by repeating steps 1 and 2.
If the solenoid still does not work properly after cleaning twice, replace the solenoid.

Installation

To install, reverse the removal procedure.
Erase Diagnostic Trouble Codes (DTCs).
Test drive the vehicle and check that no new diagnostic trouble codes (DTCs) have been stored.

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Solenoid > Component Information > Service and Repair > Procedures > Page 3244

< PREV PAGE NEXT PAGE >