volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 8
background image

Place the gear housing in a press as illustrated.

1. Use: Hot air gun.  Heat the housing around the bearing recess to 70-140° C.

999 7319 Press tool See: Tools and Equipment/999 7319 Press Tool 
Press out the auxiliaries shaft and bearing.

999 7320 Press tool See: Tools and Equipment/999 7320 Press Tool 
999 7337 Counterhold See: Tools and Equipment/999 7337 Counterhold 
999 7319 Press tool See: Tools and Equipment/999 7319 Press Tool 
This procedure releases the cam drive shaft's pulley.

999 7322 Counterhold See: Tools and Equipment/999 7322 Counterhold 
999 7337 Counterhold See: Tools and Equipment/999 7337 Counterhold 
999 7321 Press tool See: Tools and Equipment/999 7321 Press Tool 

Installation

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Accessory Drive > Component Information > Service and Repair > Page 3300

< PREV PAGE NEXT PAGE >