XC70 AWD L6-3.2L VIN 98 B6324S (2009)
permanent. Other faults that are detected are defined as intermittent.
Should a fault disappear for any reason after being stored in the control module as a permanent diagnostic trouble code, the information remains stored in
the control module. If a fault is no longer permanent, the diagnostic trouble code remains as intermittent.
Reading and erasing diagnostic trouble codes (DTCs)
Stored diagnostic trouble codes (DTCs) can be read off and erased using this function.
Diagnostic trouble codes can only be erased once all the diagnostic trouble codes have been read out at least once.
Note! Certain functions are unavailable until the diagnostic trouble codes (DTCs) have been erased.
Reading off the parameters
This function is used to read the status or value of parameters. The status or value can be presented digitally.
Activating components and functions
This function can be used to activate components and functions that affect the multimedia module (MMM).
Reading off the control module identification
The diagnostic tool identifies control modules by reading off a number of codes from the control module memory.
The codes contain information about the control module:
hardware P/N (control module without software)
hardware serial number (control module without software)
diagnostic software P/N
Reading off extended fault-tracing information
This function can be used to read out parameters, identify status and counts stored at the same time as a diagnostic trouble code (known as frozen
For more information, see Vehicle communication information in Specifications, other.