XC70 AWD L6-3.2L VIN 98 B6324S (2009)
Trailer Lighting Module: Scan Tool Testing and Procedures
Description of Reading Off Extended Diagnostic Trouble Code (DTC) Information
Description of reading off extended diagnostic trouble code (DTC) information, trailer module (TRM)
Select type of description.
-
Description of frozen values See: Description of Frozen Values, TRM
-
Description of status identifier See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description of Status Identifier
-
Description of counter See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description of Counter
Description of Parameters
Description of parameters
Parameters, status
Note! When reading off signals activated by the trailer module (TRM), there should not be any trailer connectors plugged into the socket of the
vehicle's tow hitch. The trailer connector may only be plugged into the socket if the cable harness and its connectors are checked and fault-free.
The socket for the tow hitch connector is available in several variants with different numbers of poles. The output signals for back-up
(reversing) lamps, fog lamps and charging (+12 V) is market dependent.
Tow hitch connector connected
Indicates if the trailer module (TRM) registers that the tow hitch connector is connected to the socket.
Yes = tow hitch connector is connected.
No = tow hitch connector is not connected.
Back-up (reversing) lamps
Indicates if the trailer module (TRM) has activated the signal for the back-up (reversing) lamp.
On = back-up (reversing) lamp activated.
Off = back-up (reversing) lamp not activated.
Fog lamps
Indicates if the trailer module (TRM) has activated the signal for the fog lamp.
On = fog lamp activated.
Off = fog lamp not activated.
Parking lamps
Indicates if the trailer module (TRM) has activated the signal for the parking lamp.
On = parking lamps activated.
Off = parking lamps not activated.
Stop lamp, right
Indicates if the trailer module (TRM) has activated the signal for the right-hand stop lamp.
On = right-hand stop lamp activated.
Off = right-hand stop lamp not activated.
Stop lamp, left
Indicates if the trailer module (TRM) has activated the signal for the left-hand stop lamp.
On = left-hand stop lamp activated.
Off = left-hand stop lamp not activated.
Stop lamp, input signal
Indicates if the trailer module (TRM) receives an input signal for the stop lamp from the central electronic module (CEM).
On = input signal for stop lamp received.