XC70 AWD L6-3.2L VIN 98 B6324S (2009)
Remove:
-
the connectors, x2
-
the bolts, x4
-
the Engine Control Module (ECM).
Installation
Installing the Engine Control Module (ECM)
Note! Ensure that the rubber seal is positioned correctly in its groove.
Install:
-
the Engine Control Module (ECM)
-
the bolts, x4
-
the connectors, x2
-
the cover
-
the battery's negative cable in accordance with: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Ordering software
Order the software in accordance with: 8691283.
Finishing
Check that no diagnostic trouble codes (DTC) have been stored in the control module during the repair.
Test drive the vehicle and check the function of the engine.