volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Control Module: Service and Repair

Transmission Control Module (TCM)

Operation number: 43715-2

Removal

Note! Removal steps in this procedure may contain installation details.

Note! Make sure that the selector lever is in the neutral (N) position.

Perform battery disconnecting and connecting Refer to: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting

Remove Accessory Drive Component Bracket.  See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine
Accessory Bracket/Service and Repair 

Caution! Make sure that the terminals or pins/sockets of the transmission control module (TCM) and the TCM electrical connector are not
bent or damaged.

Torque: Gear selector mechanism (nut), 16 Nm

Installation

Relays and Modules > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Locations > Page 1302

< PREV PAGE NEXT PAGE >