volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 31
background image

-

Clean the lower inside of the bumper cover using a mild soap solution.

-

Clean an area around the holes that is slightly larger than the sensor holder. Use isopropanol. Allow to dry.

-

Take four holders from the kit.

-

Clean the surface of the holders illustrated. Use isopropanol. Allow to dry.

-

Apply a thin and even coat of activator to the cleaned surfaces as illustrated. Allow to dry for at least 10 minutes.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Parking Assistance > Page 1648

< PREV PAGE NEXT PAGE >