volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 9
background image

At the same time carefully pull the cable backwards.

Installation

Make sure that the cable shoe catches are undamaged.
Press the cable shoe into the insulator.
Make sure that the cable shoe has locked in place by tugging gently on the cable.

Press the secondary catch into place.

Connector Type 9

Connector type 9

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Pry up the secondary catch

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Rain Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 2496

< PREV PAGE NEXT PAGE >