volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bluetooth, Swan Neck Microphone|Page 12826 > < Bluetooth, Swan Neck Microphone|Page 12824
Page 7
background image

-

Loosen existing connection to the microphone.

-

Connect the new microphone cable and reinstall the foam tape.

Note! Also secure the extra length of the microphone cable with the foam tape.

-

Connect the connectors to the radio/AC unit.

-

Reinstall the radio/AC unit by first hooking it on at the upper edge. Then press it upwards and angle in the lower part. At the same time, check that
the cable to the control panel for Bluetooth ends up in the right position.

-

If the radio/A/C unit does not fit at the rear edge, check that no cables have been trapped.

-

Reinstall the screws.

-

Reinstall the side panel.

-

Turn the ignition key to position II.

-

Reconnect the battery negative lead

Applies to S60, V70 and S80 (-06)

-

Turn the ignition switch to position 0.

Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.

Bluetooth, Swan Neck Microphone|Page 12826 > < Bluetooth, Swan Neck Microphone|Page 12824