volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bluetooth, Swan Neck Microphone|Page 12836 > < Bluetooth, Swan Neck Microphone|Page 12834
Page 17
background image

-

Pull out the cable from the tunnel console. Find the foam tape with connections for the Bluetooth system, located behind the tunnel console. Open
the foam tape.

-

Loosen existing connection to the microphone.

-

Connect the new microphone cable. Reinstall the foam tape.

Note! Also secure the extra length of the microphone cable with the foam tape.

-

Fold back the floor mat on both sides of the tunnel console.

Applies to the S80 (07-)

-

Turn the ignition switch to position 0.

Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.

Bluetooth, Swan Neck Microphone|Page 12836 > < Bluetooth, Swan Neck Microphone|Page 12834