XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Tape the connector from the microphone cable to the end of the wire.
-
Pull through the cable.
-
Disconnect the cable from the wire.
-
Place the microphone's bracket over the hole on the backrest.
-
Point the microphone arm 45° forward. Press down the headrest so that it locks into place.
-
Check that the headrest has locked into place by pulling it upwards.
-
Route the cable in front of the tube (1).
-
Secure the cable with a cable tie to the large connector (2).
-
Reinstall the upholstery for the backrest.
