volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Remote Control, Audio - Stereo > < Audio System - 'PI SEEK' Function|Page 13731
Page 3
background image

Caution! The connector for the antenna cover is fragile. Be careful when removing/installing.

Remove:

-

the connectors

-

the screws

-

the AM/FM receiver

-

the GPS receiver if applicable. See Receiver GPS, TMC (ATM), replace See: Global Positioning System/Global Positioning System Display
Unit/Service and Repair and TMC see Receiver GPS, TMC (ATM), replace See: Global Positioning System/Global Positioning System Display
Unit/Service and Repair.

Installation

Installing the AM/FM receiver

-

Install the GPS receiver if applicable, see Receiver GPS, TMC (ATM), replace See: Global Positioning System/Global Positioning System
Display Unit/Service and Repair and TMC see Receiver GPS, TMC (ATM), replace See: Global Positioning System/Global Positioning System
Display Unit/Service and Repair.

-

Align the AM/FM receiver

-

Install and tighten the screws
Caution! The connector for the antenna cover is fragile. Be careful when removing/installing.

Connect the connectors.

Finishing work

Install the aerial mounting and the aerial. See Antenna with antenna mounting (ATM), replacing See: Antenna/Service and Repair/Antenna with Antenna
Mounting (ATM), Replacing.

Ordering software

Note! After replacing the AM/FM (ATM) receiver, new software must be ordered and programmed.

Order the software. See: Testing and Inspection/Programming and Relearning/Software Downloading

Test the function.

Remote Control, Audio - Stereo > < Audio System - 'PI SEEK' Function|Page 13731