XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section.
Centre loudspeaker
Illustration A
Remove the loudspeaker grille as follows:
-
Take a piece of 1.5 mm (1/16") diameter welding rod. Bend one end to 90° (L=5 mm (13/64")). The other end is bent to form a handle
-
Insert the first bent end down into the joint between the loudspeaker grille and the dashboard as illustrated, until it engages
-
Twist the welding rod 90° so that the bend section engages with the underneath of the loudspeaker grille. It may necessary to move the welding rod
along the joint to twist the rod around.
Illustration B
