XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Press the cable harnesses into place on the subwoofer into the existing clamp (1)
-
Reinstall the fusebox
-
Now adjust the routing of the cable harnesses up to the front edge of the wheel arch so that it reaches the subwoofer Carefully press the cable
harness under the lower edge of the subwoofer so that it remains in place. Clamp the cable harness at point (2) using a cable harness from the kit.
Applies to cars with three rows of seats
-
Ensure that the cable harness is positioned as far to the left as possible on the panel support for the left-hand side panel. This is to prevent the cable
harness from being trapped
-
Tape the cable harness at the panel support.
-
Slacken off the screw for the existing ground lead under the panel (1). Pull up and connect the routed ground lead (2) together with the existing
ground lead. Tighten the screw.
-
Press down the catch on top of the largest connector (1) (14-pin). Pull it off the connector in the connector bridge.
