XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Fold the backrest of the second row of seats forwards. The backrest will then be used as a work surface
-
Position the C-post panel with the front side facing down on, for example, a block of wood to cut out holes for the receiver
-
To prevent scratching the panel place a blanket or similar over the block of wood
-
Fold the foam rubber out of the way.
-
Cut out a hole in the panel following the embossing on the inside. Use a utility knife or similar.
Note! Do not make the hole too large. The edges of the telephone speaker are only 1 mm (1/32") larger than the dimensions of the cut-out.
-
Test and adjust using a file until the telephone speaker is seated.
-
Press the telephone speaker into the hole on the C-post panel
-
Fold the foam rubber back into place.