XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Trailer Connector: Service and Repair
Part 1
Tow bar wiring, 7-pin
Note!
-
Steps 1, 4, 7-16 apply to the S60.
-
Steps 3, 5, 17-26 apply to the S80.
-
Steps 2, 5, 27-40 apply to the V70.
-
Steps 6, 41-57 apply to the XC90.
Installing the connector for detachable tow bars
Applies to the S60
-
Turn the ignition key to position 0.
-
Install the trailer connector with the three screws and the nuts. Tighten.
-
Route the cable along the underneath of the tow bar member as illustrated.
-
Secure the cable using two tie straps.
Applies to the V70
-
Turn the ignition key to position 0.
-
Install the trailer connector with the three screws and the nuts. Tighten.
-
Ensure that the cable harness is as close to the centre mounting on the tow bar member as possible. This is important to prevent the cable harness
from being caught in the cut-out bumper.
-
Secure the cable with a tie strap.
Applies to the S80
