XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Remove the three screws in the battery holder. Lift the battery holder out
-
Remove the battery cover
-
Lower and remove the spare wheel.
Illustration A
From underneath the car
1. Measure and draw a horizontal line 6 mm below the top of the ribs as illustrated
2. Cut along the inside of ribs 1 and 3 (the sides which face rib 2) up to the line drawn 6 mm below the top edge of the ribs. Do the same between
ribs 6 and 4. Remove the shaded areas by cutting between the cuts along the horizontal line so that two parallel slits are made in the bumper cover
3. Cut away the remaining pieces of ribs 2 and 5 parallel to the bumper cover.
-
Use a file to smooth off the edges of the cut outs.
Illustration B
-
Cut away all the upright ribs.
Illustration C
